Frequently Asked Questions

Area

Can I Install On Grass?

Yes. Once the temperature is very cold, you can install
directly on grass. Having a bed of snow has an advantage.
it acts as a natural refrigerant to the rink. It can also be used to
correct any gradients to your backyard.

How Level Should The Ground Be?

A level ground is recommended. Snow can correct slight
gradients. Hay can be used for steeper gradients. If budget
allows, even a sub-floor.

Will It Damage The Lawn?

Timely removal of the rink is important. The first signs of spring
are the best to remove the rink.

How Can I Make A Bigger Rink?

For even sufaces, you can place the rinks side by side. For areas
that have a slight slope, place the rinks leaving a 4" gap between
each of the rinks. Fill the gaps with slush smoothly and allow
to freeze.

Ice

How Thick Is The Ice?

Initially, the ice is 3" thick. With regular constant flooding, you would
have approximatly 5-6" of ice.

What Do I Do If There Is An Air Pocket?

Fill the pocket with slush and allow to freeze.

What Happens If There Is A Thaw?

You would allow the remainder of the water to sit on the liner.
When the temperature is cold again, The water would re-freeze.
build up again using hose floods or the 'Ice Master'
grooming tool.

Do I Cut The Top Sheet Of The Plastic At The Seams?

No. Cut the top sheet approximatly 6" inwards from the seam, around
the perimeter of the rink: it helps contain the water should there
be a thaw.

Flooding

Can I ?Over-Flood? The Rink?

Yes. Too much water can cause the water to freeze ?in slivers?.
we recommend thin applications repeatedly. Ensure the water
has frozen between floods.

Should I Use Hot Or Cold Water To Flood?

Cold water builds up the ice depth. Hot water makes for a stronger,
smoother ice surface. Hot water floods are recommended prior to skating.